The contracting authorities intends to jointly buy:
Long-range aerial drone (unmanned aerial vehicle (UAV)) with the following mandatory minimum requirements:
- Complies with technical requirements in EASA PDRA-G01 and PDRA-G02
- Typical kinetic energy up to 34 kJ from 120 m altitude
- Maximum characteristic dimension 3 m
- Transport size less than 2 m in diameter
- Payload should be over or equal 6 kg
- The drone should be suitable for vertical take-off and landing.
- The drone will be designed as a field mapping tool for the laser scanners, optical cameras, water quality/quantity sensors, etc. These kinds of instrumentation should be able to be attached onto the drone, occasionally more than one at a time.
- Flight time with 6 kg payload should be at least 120 minutes
- Minimum flight speed of the drone should be 5 m/s or less. Capability also to fly with up to 12 m/s flight speed or more.
- see more closely Lot 1 requirements list
and
Aerial drone fleet with data loading and recharging docking station (unmanned aerial vehicle (UAV)) with the following mandatory minimum requirements:
- with take-off weight less than 25 kg. Total weight not exceeding 25 kg, payload capacity more than 2 kg (payload must be interchangeable e.g., RGB, spectral cameras, lidar). Therefore, these kinds of instrumentations should be able to attach onto the drone.
- Flight time with maximum payload should be at least 30 min
- Minimum flight speed of the drone should be 3 m/s or less. Capability also to fly with up to 8 m/s or more.
- see more closely Lot 2 requirements list
The purchase is divided into two independent parts. Tenderers may offer any or all parts.