Compact shelving for The Science Museum at NTNU.

Information

Open procedure
10/14/2016 9:36 AM (GMT+02:00)
11/16/2016 12:00 PM
11/12/2016 11:59 PM

Buyer

NTNU (The Norwegian University of Science and Technology) NTNU (The Norwegian University of Science and Technology)
Terje Haarberg
Jonsvannsveien 82, bygg A
7050 Trondheim
Norway

Closing date has passed.

Short description

The NTNU Science Museum, Section for natural history in Trondheim shall refurbish their store rooms in central Trondheim. Delivery and assembly of a complete store room fit out shall be offered, as described below.

In order for the Contracting Authority to assess the composition of the product/solution based on the tenderer's tender offer, we request sufficient documentation to best evaluate the offer(s), as well as a quotation on the offered system proposals for defined rooms with any proposals for replacement and or additional solutions.

Cardboard boxes in three different format shall be stored, and it is of significant importance for the selection of tenderer that the described capacity and an increase of capacity are satisfied. Alternative solution proposals can also be presented, but these must satisfy the Contracting Authority's minimum requirements for new shelving and the requested capacity. Currently, the Contracting Authority estimates a need for approx. 6 000 boxes in the stated formats, but this may change over time. The need for storage will increase significantly during the next 20 — 30 years (estimated to have a minimum 30-40 % increase).

In the announcement documents you will find attached drawings that show the design of the premises, as well as the desired placement of the shelves.

The free height from the top of the current floor and to the under edge of the beams in the roof is approx. 2 700 mm. However, there are two ventilation pipe routes under the roof (see indication in the attached drawing). The distance from the current floor to the underside of the pipes varies somewhat, but is mainly between approx. 2 000 mm and approx. 2 250 mm, cf, the sectional drawing for the floor.

Placement of doors in the premises in indicated on the attached drawing. The same for a new wall to be built.

Fur further assignment requirements, please see the Contracting Authority's function description and requirement specification in Annex 1 (see attached).

Mercell Holding AS

Part of the Mercell Group, one of Europe’s leading providers of e tender systems and information between buyers and suppliers in the professional market.

Contact us

Write to us

+47 21 01 88 00