Информация о тендере
South-Eastern Finland University of Applied Sciences (Xamk) is purchasing a temperature and humidity chamber with a carbon dioxide feed system for the studies of the durability properties of concrete. Equipment will be located in Xamk's research laboratory KymiLabs Research Center, address: Salakuljettajantie 4, 48100 Kotka, Finland.
2024-09-26 08:45
South-Eastern Finland University of Applied Sciences (Xamk) is purchasing a temperature and humidity chamber with a carbon dioxide feed system for the studies of the durability properties of concrete. Equipment will be located in Xamk´s research laboratory KymiLabs Research Center, address: Salakuljettajantie 4, 48100 Kotka, Finland.
->
A temperature and humidity chamber with a carbon dioxide feed system is needed for the studies of the durability properties of concrete. A CO2 supply system can be a separate system combined with a cabinet and a gas measurement with a sensor takes place from a climate cabinet. For carbon dioxide, a separate regulator is needed to adjust its amount. The need for a control area is 0-8%. The cabinet is aiming for a constant relative humidity of 60% and a constant temperature of +20 degrees Celsius.
Objectives of the acquisition
We ask for offers for a temperature and humidity chamber with a carbon dioxide feed system, which will be delivered on site ready for use.
The content of the procurement
1.A temperature and humidity chamber with carbon dioxide supply system or a similar product, 1 piece
- The weight of the device is less than 1000 kg.
- The temperature in the chamber can be adjusted between +10 and +30 degrees Celcius.
- The desired operating conditions are +20 degrees Celsius and 60% relative humidity, where the device must be able to operate without freezing.
- The floor load capacity of the environmental cabinet is suitable for a working load of 300 kg, with a weight distribution of at least three levels.
- The material of the levels of the chamber, and the interior surfaces of the chamber, is stainless steel.
- The depth or width of the cabinet shelves is at least 600 mm.
The offer must include:
- Price including delivery, installation ready for use and user training, excluding VAT (including VAT 0%).
- Brochure/description of the product offered and its features. Alternatively, a web address where the brochure of the offered product can be found.
- Description of product warranty and maintenance.
- Delivery time.
2024-09-26 09:45
South-Eastern Finland University of Applied Sciences (Xamk) is purchasing a temperature and humidity chamber with a carbon dioxide feed system for the studies of the durability properties of concrete. Equipment will be located in Xamk´s research laboratory KymiLabs Research Center, address: Salakuljettajantie 4, 48100 Kotka, Finland.
2024-09-26 08:45
South-Eastern Finland University of Applied Sciences (Xamk) is purchasing a temperature and humidity chamber with a carbon dioxide feed system for the studies of the durability properties of concrete. Equipment will be located in Xamk´s research laboratory KymiLabs Research Center, address: Salakuljettajantie 4, 48100 Kotka, Finland.
->
A temperature and humidity chamber with a carbon dioxide feed system is needed for the studies of the durability properties of concrete. A CO2 supply system can be a separate system combined with a cabinet and a gas measurement with a sensor takes place from a climate cabinet. For carbon dioxide, a separate regulator is needed to adjust its amount. The need for a control area is 0-8%. The cabinet is aiming for a constant relative humidity of 60% and a constant temperature of +20 degrees Celsius.
Objectives of the acquisition
We ask for offers for a temperature and humidity chamber with a carbon dioxide feed system, which will be delivered on site ready for use.
The content of the procurement
1.A temperature and humidity chamber with carbon dioxide supply system or a similar product, 1 piece
- The weight of the device is less than 1000 kg.
- The temperature in the chamber can be adjusted between +10 and +30 degrees Celcius.
- The desired operating conditions are +20 degrees Celsius and 60% relative humidity, where the device must be able to operate without freezing.
- The floor load capacity of the environmental cabinet is suitable for a working load of 300 kg, with a weight distribution of at least three levels.
- The material of the levels of the chamber, and the interior surfaces of the chamber, is stainless steel.
- The depth or width of the cabinet shelves is at least 600 mm.
The offer must include:
- Price including delivery, installation ready for use and user training, excluding VAT (including VAT 0%).
- Brochure/description of the product offered and its features. Alternatively, a web address where the brochure of the offered product can be found.
- Description of product warranty and maintenance.
- Delivery time.
->
A temperature and humidity chamber with a carbon dioxide feed system is needed for the studies of the durability properties of concrete. A CO2 supply system can be a separate system combined with a cabinet and a gas measurement with a sensor takes place from a climate cabinet. For carbon dioxide, a separate regulator is needed to adjust its amount. The need for a control area is 0-8%. The cabinet is aiming for a constant relative humidity of 60% and a constant temperature of +20 degrees Celsius.
Objectives of the acquisition
We ask for offers for a temperature and humidity chamber with a carbon dioxide feed system, which will be delivered on site ready for use.
The content of the procurement
1.A temperature and humidity chamber with carbon dioxide supply system or a similar product, 1 piece
- The weight of the device is less than 1000 kg.
- The temperature in the chamber can be adjusted between +10 and +30 degrees Celcius.
- The desired operating conditions are +20 degrees Celsius and 60% relative humidity, where the device must be able to operate without freezing.
- The floor load capacity of the environmental cabinet is suitable for a working load of 300 kg, with a weight distribution of at least three levels.
- The material of the levels of the chamber, and the interior surfaces of the chamber, is stainless steel.
- The depth or width of the cabinet shelves is at least 600 mm.
The offer must include:
- Price including delivery, installation ready for use and user training, excluding VAT (including VAT 0%).
- Brochure/description of the product offered and its features. Alternatively, a web address where the brochure of the offered product can be found.
- Description of product warranty and maintenance.
- Delivery time.
2024-10-04 10:01
South-Eastern Finland University of Applied Sciences (Xamk) is purchasing a temperature and humidity chamber with a carbon dioxide feed system for the studies of the durability properties of concrete. Equipment will be located in Xamk´s research laboratory KymiLabs Research Center, address: Salakuljettajantie 4, 48100 Kotka, Finland.
2024-09-26 08:45
South-Eastern Finland University of Applied Sciences (Xamk) is purchasing a temperature and humidity chamber with a carbon dioxide feed system for the studies of the durability properties of concrete. Equipment will be located in Xamk´s research laboratory KymiLabs Research Center, address: Salakuljettajantie 4, 48100 Kotka, Finland.
->
A temperature and humidity chamber with a carbon dioxide feed system is needed for the studies of the durability properties of concrete. A CO2 supply system can be a separate system combined with a cabinet and a gas measurement with a sensor takes place from a climate cabinet. For carbon dioxide, a separate regulator is needed to adjust its amount. The need for a control area is 0-8%. The cabinet is aiming for a constant relative humidity of 60% and a constant temperature of +20 degrees Celsius.
Objectives of the acquisition
We ask for offers for a temperature and humidity chamber with a carbon dioxide feed system, which will be delivered on site ready for use.
The content of the procurement
1.A temperature and humidity chamber with carbon dioxide supply system or a similar product, 1 piece
- The weight of the device is less than 1000 kg.
- The temperature in the chamber can be adjusted between +10 and +30 degrees Celcius.
- The desired operating conditions are +20 degrees Celsius and 60% relative humidity, where the device must be able to operate without freezing.
- The floor load capacity of the environmental cabinet is suitable for a working load of 300 kg, with a weight distribution of at least three levels.
- The material of the levels of the chamber, and the interior surfaces of the chamber, is stainless steel.
- The depth or width of the cabinet shelves is at least 600 mm.
The offer must include:
- Price including delivery, installation ready for use and user training, excluding VAT (including VAT 0%).
- Brochure/description of the product offered and its features. Alternatively, a web address where the brochure of the offered product can be found.
- Description of product warranty and maintenance.
- Delivery time.
2024-09-26 09:45
South-Eastern Finland University of Applied Sciences (Xamk) is purchasing a temperature and humidity chamber with a carbon dioxide feed system for the studies of the durability properties of concrete. Equipment will be located in Xamk´s research laboratory KymiLabs Research Center, address: Salakuljettajantie 4, 48100 Kotka, Finland.
2024-09-26 08:45
South-Eastern Finland University of Applied Sciences (Xamk) is purchasing a temperature and humidity chamber with a carbon dioxide feed system for the studies of the durability properties of concrete. Equipment will be located in Xamk´s research laboratory KymiLabs Research Center, address: Salakuljettajantie 4, 48100 Kotka, Finland.
->
A temperature and humidity chamber with a carbon dioxide feed system is needed for the studies of the durability properties of concrete. A CO2 supply system can be a separate system combined with a cabinet and a gas measurement with a sensor takes place from a climate cabinet. For carbon dioxide, a separate regulator is needed to adjust its amount. The need for a control area is 0-8%. The cabinet is aiming for a constant relative humidity of 60% and a constant temperature of +20 degrees Celsius.
Objectives of the acquisition
We ask for offers for a temperature and humidity chamber with a carbon dioxide feed system, which will be delivered on site ready for use.
The content of the procurement
1.A temperature and humidity chamber with carbon dioxide supply system or a similar product, 1 piece
- The weight of the device is less than 1000 kg.
- The temperature in the chamber can be adjusted between +10 and +30 degrees Celcius.
- The desired operating conditions are +20 degrees Celsius and 60% relative humidity, where the device must be able to operate without freezing.
- The floor load capacity of the environmental cabinet is suitable for a working load of 300 kg, with a weight distribution of at least three levels.
- The material of the levels of the chamber, and the interior surfaces of the chamber, is stainless steel.
- The depth or width of the cabinet shelves is at least 600 mm.
The offer must include:
- Price including delivery, installation ready for use and user training, excluding VAT (including VAT 0%).
- Brochure/description of the product offered and its features. Alternatively, a web address where the brochure of the offered product can be found.
- Description of product warranty and maintenance.
- Delivery time.
->
A temperature and humidity chamber with a carbon dioxide feed system is needed for the studies of the durability properties of concrete. A CO2 supply system can be a separate system combined with a cabinet and a gas measurement with a sensor takes place from a climate cabinet. For carbon dioxide, a separate regulator is needed to adjust its amount. The need for a control area is 0-8%. The cabinet is aiming for a constant relative humidity of 60% and a constant temperature of +20 degrees Celsius.
Objectives of the acquisition
We ask for offers for a temperature and humidity chamber with a carbon dioxide feed system, which will be delivered on site ready for use.
The content of the procurement
1.A temperature and humidity chamber with carbon dioxide supply system or a similar product, 1 piece
- The weight of the device is less than 1000 kg.
- The temperature in the chamber can be adjusted between +10 and +30 degrees Celcius.
- The desired operating conditions are +20 degrees Celsius and 60% relative humidity, where the device must be able to operate without freezing.
- The floor load capacity of the environmental cabinet is suitable for a working load of 300 kg, with a weight distribution of at least three levels.
- The material of the levels of the chamber, and the interior surfaces of the chamber, is stainless steel.
- The depth or width of the cabinet shelves is at least 600 mm.
The offer must include:
- Price including delivery, installation ready for use and user training, excluding VAT (including VAT 0%).
- Brochure/description of the product offered and its features. Alternatively, a web address where the brochure of the offered product can be found.
- Description of product warranty and maintenance.
- Delivery time.
->
South-Eastern Finland University of Applied Sciences (Xamk) is purchasing a temperature and humidity chamber with a carbon dioxide feed system for the studies of the durability properties of concrete. Equipment will be located in Xamk´s research laboratory KymiLabs Research Center, address: Salakuljettajantie 4, 48100 Kotka, Finland.
2024-10-04 12:44
South-Eastern Finland University of Applied Sciences (Xamk) is purchasing a temperature and humidity chamber with a carbon dioxide feed system for the studies of the durability properties of concrete. Equipment will be located in Xamk´s research laboratory KymiLabs Research Center, address: Salakuljettajantie 4, 48100 Kotka, Finland.
2024-09-26 08:45
South-Eastern Finland University of Applied Sciences (Xamk) is purchasing a temperature and humidity chamber with a carbon dioxide feed system for the studies of the durability properties of concrete. Equipment will be located in Xamk´s research laboratory KymiLabs Research Center, address: Salakuljettajantie 4, 48100 Kotka, Finland.
->
A temperature and humidity chamber with a carbon dioxide feed system is needed for the studies of the durability properties of concrete. A CO2 supply system can be a separate system combined with a cabinet and a gas measurement with a sensor takes place from a climate cabinet. For carbon dioxide, a separate regulator is needed to adjust its amount. The need for a control area is 0-8%. The cabinet is aiming for a constant relative humidity of 60% and a constant temperature of +20 degrees Celsius.
Objectives of the acquisition
We ask for offers for a temperature and humidity chamber with a carbon dioxide feed system, which will be delivered on site ready for use.
The content of the procurement
1.A temperature and humidity chamber with carbon dioxide supply system or a similar product, 1 piece
- The weight of the device is less than 1000 kg.
- The temperature in the chamber can be adjusted between +10 and +30 degrees Celcius.
- The desired operating conditions are +20 degrees Celsius and 60% relative humidity, where the device must be able to operate without freezing.
- The floor load capacity of the environmental cabinet is suitable for a working load of 300 kg, with a weight distribution of at least three levels.
- The material of the levels of the chamber, and the interior surfaces of the chamber, is stainless steel.
- The depth or width of the cabinet shelves is at least 600 mm.
The offer must include:
- Price including delivery, installation ready for use and user training, excluding VAT (including VAT 0%).
- Brochure/description of the product offered and its features. Alternatively, a web address where the brochure of the offered product can be found.
- Description of product warranty and maintenance.
- Delivery time.
2024-09-26 09:45
South-Eastern Finland University of Applied Sciences (Xamk) is purchasing a temperature and humidity chamber with a carbon dioxide feed system for the studies of the durability properties of concrete. Equipment will be located in Xamk´s research laboratory KymiLabs Research Center, address: Salakuljettajantie 4, 48100 Kotka, Finland.
2024-09-26 08:45
South-Eastern Finland University of Applied Sciences (Xamk) is purchasing a temperature and humidity chamber with a carbon dioxide feed system for the studies of the durability properties of concrete. Equipment will be located in Xamk´s research laboratory KymiLabs Research Center, address: Salakuljettajantie 4, 48100 Kotka, Finland.
->
A temperature and humidity chamber with a carbon dioxide feed system is needed for the studies of the durability properties of concrete. A CO2 supply system can be a separate system combined with a cabinet and a gas measurement with a sensor takes place from a climate cabinet. For carbon dioxide, a separate regulator is needed to adjust its amount. The need for a control area is 0-8%. The cabinet is aiming for a constant relative humidity of 60% and a constant temperature of +20 degrees Celsius.
Objectives of the acquisition
We ask for offers for a temperature and humidity chamber with a carbon dioxide feed system, which will be delivered on site ready for use.
The content of the procurement
1.A temperature and humidity chamber with carbon dioxide supply system or a similar product, 1 piece
- The weight of the device is less than 1000 kg.
- The temperature in the chamber can be adjusted between +10 and +30 degrees Celcius.
- The desired operating conditions are +20 degrees Celsius and 60% relative humidity, where the device must be able to operate without freezing.
- The floor load capacity of the environmental cabinet is suitable for a working load of 300 kg, with a weight distribution of at least three levels.
- The material of the levels of the chamber, and the interior surfaces of the chamber, is stainless steel.
- The depth or width of the cabinet shelves is at least 600 mm.
The offer must include:
- Price including delivery, installation ready for use and user training, excluding VAT (including VAT 0%).
- Brochure/description of the product offered and its features. Alternatively, a web address where the brochure of the offered product can be found.
- Description of product warranty and maintenance.
- Delivery time.
->
A temperature and humidity chamber with a carbon dioxide feed system is needed for the studies of the durability properties of concrete. A CO2 supply system can be a separate system combined with a cabinet and a gas measurement with a sensor takes place from a climate cabinet. For carbon dioxide, a separate regulator is needed to adjust its amount. The need for a control area is 0-8%. The cabinet is aiming for a constant relative humidity of 60% and a constant temperature of +20 degrees Celsius.
Objectives of the acquisition
We ask for offers for a temperature and humidity chamber with a carbon dioxide feed system, which will be delivered on site ready for use.
The content of the procurement
1.A temperature and humidity chamber with carbon dioxide supply system or a similar product, 1 piece
- The weight of the device is less than 1000 kg.
- The temperature in the chamber can be adjusted between +10 and +30 degrees Celcius.
- The desired operating conditions are +20 degrees Celsius and 60% relative humidity, where the device must be able to operate without freezing.
- The floor load capacity of the environmental cabinet is suitable for a working load of 300 kg, with a weight distribution of at least three levels.
- The material of the levels of the chamber, and the interior surfaces of the chamber, is stainless steel.
- The depth or width of the cabinet shelves is at least 600 mm.
The offer must include:
- Price including delivery, installation ready for use and user training, excluding VAT (including VAT 0%).
- Brochure/description of the product offered and its features. Alternatively, a web address where the brochure of the offered product can be found.
- Description of product warranty and maintenance.
- Delivery time.
2024-10-04 10:01
South-Eastern Finland University of Applied Sciences (Xamk) is purchasing a temperature and humidity chamber with a carbon dioxide feed system for the studies of the durability properties of concrete. Equipment will be located in Xamk´s research laboratory KymiLabs Research Center, address: Salakuljettajantie 4, 48100 Kotka, Finland.
2024-09-26 08:45
South-Eastern Finland University of Applied Sciences (Xamk) is purchasing a temperature and humidity chamber with a carbon dioxide feed system for the studies of the durability properties of concrete. Equipment will be located in Xamk´s research laboratory KymiLabs Research Center, address: Salakuljettajantie 4, 48100 Kotka, Finland.
->
A temperature and humidity chamber with a carbon dioxide feed system is needed for the studies of the durability properties of concrete. A CO2 supply system can be a separate system combined with a cabinet and a gas measurement with a sensor takes place from a climate cabinet. For carbon dioxide, a separate regulator is needed to adjust its amount. The need for a control area is 0-8%. The cabinet is aiming for a constant relative humidity of 60% and a constant temperature of +20 degrees Celsius.
Objectives of the acquisition
We ask for offers for a temperature and humidity chamber with a carbon dioxide feed system, which will be delivered on site ready for use.
The content of the procurement
1.A temperature and humidity chamber with carbon dioxide supply system or a similar product, 1 piece
- The weight of the device is less than 1000 kg.
- The temperature in the chamber can be adjusted between +10 and +30 degrees Celcius.
- The desired operating conditions are +20 degrees Celsius and 60% relative humidity, where the device must be able to operate without freezing.
- The floor load capacity of the environmental cabinet is suitable for a working load of 300 kg, with a weight distribution of at least three levels.
- The material of the levels of the chamber, and the interior surfaces of the chamber, is stainless steel.
- The depth or width of the cabinet shelves is at least 600 mm.
The offer must include:
- Price including delivery, installation ready for use and user training, excluding VAT (including VAT 0%).
- Brochure/description of the product offered and its features. Alternatively, a web address where the brochure of the offered product can be found.
- Description of product warranty and maintenance.
- Delivery time.
2024-09-26 09:45
South-Eastern Finland University of Applied Sciences (Xamk) is purchasing a temperature and humidity chamber with a carbon dioxide feed system for the studies of the durability properties of concrete. Equipment will be located in Xamk´s research laboratory KymiLabs Research Center, address: Salakuljettajantie 4, 48100 Kotka, Finland.
2024-09-26 08:45
South-Eastern Finland University of Applied Sciences (Xamk) is purchasing a temperature and humidity chamber with a carbon dioxide feed system for the studies of the durability properties of concrete. Equipment will be located in Xamk´s research laboratory KymiLabs Research Center, address: Salakuljettajantie 4, 48100 Kotka, Finland.
->
A temperature and humidity chamber with a carbon dioxide feed system is needed for the studies of the durability properties of concrete. A CO2 supply system can be a separate system combined with a cabinet and a gas measurement with a sensor takes place from a climate cabinet. For carbon dioxide, a separate regulator is needed to adjust its amount. The need for a control area is 0-8%. The cabinet is aiming for a constant relative humidity of 60% and a constant temperature of +20 degrees Celsius.
Objectives of the acquisition
We ask for offers for a temperature and humidity chamber with a carbon dioxide feed system, which will be delivered on site ready for use.
The content of the procurement
1.A temperature and humidity chamber with carbon dioxide supply system or a similar product, 1 piece
- The weight of the device is less than 1000 kg.
- The temperature in the chamber can be adjusted between +10 and +30 degrees Celcius.
- The desired operating conditions are +20 degrees Celsius and 60% relative humidity, where the device must be able to operate without freezing.
- The floor load capacity of the environmental cabinet is suitable for a working load of 300 kg, with a weight distribution of at least three levels.
- The material of the levels of the chamber, and the interior surfaces of the chamber, is stainless steel.
- The depth or width of the cabinet shelves is at least 600 mm.
The offer must include:
- Price including delivery, installation ready for use and user training, excluding VAT (including VAT 0%).
- Brochure/description of the product offered and its features. Alternatively, a web address where the brochure of the offered product can be found.
- Description of product warranty and maintenance.
- Delivery time.
->
A temperature and humidity chamber with a carbon dioxide feed system is needed for the studies of the durability properties of concrete. A CO2 supply system can be a separate system combined with a cabinet and a gas measurement with a sensor takes place from a climate cabinet. For carbon dioxide, a separate regulator is needed to adjust its amount. The need for a control area is 0-8%. The cabinet is aiming for a constant relative humidity of 60% and a constant temperature of +20 degrees Celsius.
Objectives of the acquisition
We ask for offers for a temperature and humidity chamber with a carbon dioxide feed system, which will be delivered on site ready for use.
The content of the procurement
1.A temperature and humidity chamber with carbon dioxide supply system or a similar product, 1 piece
- The weight of the device is less than 1000 kg.
- The temperature in the chamber can be adjusted between +10 and +30 degrees Celcius.
- The desired operating conditions are +20 degrees Celsius and 60% relative humidity, where the device must be able to operate without freezing.
- The floor load capacity of the environmental cabinet is suitable for a working load of 300 kg, with a weight distribution of at least three levels.
- The material of the levels of the chamber, and the interior surfaces of the chamber, is stainless steel.
- The depth or width of the cabinet shelves is at least 600 mm.
The offer must include:
- Price including delivery, installation ready for use and user training, excluding VAT (including VAT 0%).
- Brochure/description of the product offered and its features. Alternatively, a web address where the brochure of the offered product can be found.
- Description of product warranty and maintenance.
- Delivery time.
->
South-Eastern Finland University of Applied Sciences (Xamk) is purchasing a temperature and humidity chamber with a carbon dioxide feed system for the studies of the durability properties of concrete. Equipment will be located in Xamk´s research laboratory KymiLabs Research Center, address: Salakuljettajantie 4, 48100 Kotka, Finland.
->
A temperature and humidity chamber with a carbon dioxide feed system is needed for the studies of the durability properties of concrete. A CO2 supply system can be a separate system combined with a cabinet and a gas measurement with a sensor takes place from a climate cabinet. For carbon dioxide, a separate regulator is needed to adjust its amount. The need for a control area is 0-8%. The cabinet is aiming for a constant relative humidity of 60% and a constant temperature of +20 degrees Celsius.
Objectives of the acquisition
We ask for offers for a temperature and humidity chamber with a carbon dioxide feed system, which will be delivered on site ready for use.
The content of the procurement
1.A temperature and humidity chamber with carbon dioxide supply system or a similar product, 1 piece
- The weight of the device is less than 1000 kg.
- The temperature in the chamber can be adjusted between +10 and +30 degrees Celcius.
- The desired operating conditions are +20 degrees Celsius and 60% relative humidity, where the device must be able to operate without freezing.
- The floor load capacity of the environmental cabinet is suitable for a working load of 200 kg, with a weight distribution of at least three levels.
- The material of the levels of the chamber, and the interior surfaces of the chamber, is stainless steel.
- The depth or width of the cabinet shelves is at least 600 mm.
The offer must include:
- Price including delivery, installation ready for use and user training, excluding VAT (including VAT 0%).
- Brochure/description of the product offered and its features. Alternatively, a web address where the brochure of the offered product can be found.
- Description of product warranty and maintenance.
- Delivery time.