The
assignment includes inspection, repair and maintenance service of the frigate F363 Niels Juel. The assignment includes
inter alia docking and bottom inspection, a startup of Class Reneval Survey,
exterior painting, repair and maintenance work on the hull and accommodation
quarters, as well as general inspection, maintenance and repair work of the
vessel's mechanical and electrical systems and components. In addition to the services already specified, the Supplier shall furthermore accept to perform further services on the vessel if needs for additional repairs etc. are identified by DALO during inspections, and if ordered by DALO.
The
ship's main data:
A) Steel ship.
B) Overall
length: 138,70 m.
C) Length
p.p.: 125,00 m.
D) Width
max: 19,75 m.
E) Draught
lower edge of the hull: 4,98 m.
F) Draught
lower edge of the sonar: 5,86 m.
G) Draught
lower edge of the propeller: 6,11 Displacement v. 5.31 m.: 6 645 tons.
The
following must be observed when docking:
A) No
support in sonar range (from sp. 154 to sp. 171).
B) Lower
edge of sonar dome is 1,012 mm. below baseline (BL).
C) Minimum
17.2 m. free space aft of sp. 0 to 200 mm below the BL for placement of axles
must be ensured. Max. extension of the stabilizer wings 11,975 m. from the
center line.
The
ship is available during the period 03.10.2016-21.10.2016.
DALO is expecting to dispatch invitations to participate to selected candidates on the 23 June 2016. DALO is furthermore expecting to organize an Inspection Meeting (“Bidders Conference”) on Wednesday the 6 July 2016, which will be held for all tenderers on board the frigate F363 Niels Juel at Naval base Korsoer, Sylowsvej 8, DK-4200 Korsoer, cf. section VI.3.